Are you experiencing slow performance on your x680 Infinix device? One solution to this problem is to flash your device’s firmware. Flashing your device’s firmware can improve its performance, fix bugs and improve the overall functionality of your device. In this guide, we will show you how to flash your x680 Infinix firmware in a step-by-step process.

Before You Begin

Before you begin the flashing process, there are some things you need to do first:

  • Backup all your important data from the device as flashing process wipes out all data.
  • Charge your device so that it has enough battery life to complete the flashing process without interruption.
  • Download and install the necessary drivers for your device on your computer.
  • Download the x680 Infinix firmware file from a trusted source.

Steps to Flash x680 Infinix Firmware

Step 1: Install SP Flash Tool

SP Flash Tool is a tool used to flash firmware onto your device. To install the tool, follow these steps:

  1. Download SP Flash Tool onto your computer.
  2. Extract the downloaded zip file to a folder on your computer.
  3. Double click on the .exe file to start installation process.
  4. Follow the instructions on the screen to complete the installation.

Step 2: Download the Firmware File

Download the x680 Infinix firmware file from a trusted source and save it to a folder on your computer. Extract the firmware file to the same folder where you installed SP Flash Tool.

Step 3: Launch SP Flash Tool

Launch the SP Flash Tool application by double-clicking on its icon from the folder where you installed it.

Step 4: Load the Firmware File

Click on the Scatter-loading button in SP Flash Tool and browse for the scatter file that came with your firmware. The scatter file contains information about how the firmware should be flashed onto your device.

Step 5: Connect Your Device to Your Computer

Turn off your device and connect it to your computer using a USB cable. If your computer does not recognize your device, make sure you have installed the necessary drivers.

Step 6: Begin the Flashing Process

Once your device is connected, click on the Download button in SP Flash Tool to begin the flashing process. The process can take several minutes, so be patient and do not disconnect your device during the process.

Step 7: Completion

Once the flashing process is complete, you will see a green circle indicating success. Disconnect your device from your computer and turn it on. You should now be able to experience improved performance on your x680 Infinix device.

Conclusion

Flashing your x680 Infinix firmware can improve your device’s performance and functionality. Follow these simple steps to complete the procedure successfully. Remember, always backup all your important data before flashing your device’s firmware.